Three-cylinder world premiere and other novelties from Hatz [PRESS KIT]

Visitors at Bauma 2016 will not only see the world premiere of the water-cooled three-cylinder engines of the current H family. In addition, the German engine manufacturer will present future orientated solutions around the proposed emission standard EU stage V.

Hatz Systems will also introduce modern generator sets and hydraulic power packs. The exhibition stands are located in hall A4 number 548 and at the courtyard 4 5A stand 9.

World premiere of the three-cylinder Hatz 3H50

Together with the already existing Hatz 4H50 engines there will also be three-cylinders available in the future. For an optimal combustion process, best operating characteristics and reduced emissions they are also equipped with the Bosch common rail technology similar to their bigger brothers. Thanks to the turbo charger and the intercooler the engines have a maximum torque of 200 newton meters and a maximum power of 46 kilowatts. This all requires an installation space of less than a fifth of a cubic meter only. With a capacity of 1.5 litres and a maximum speed of 2800 revolutions per minute this three-cylinder engine sets standards.

Series production from 2018

The Hatz 3H50TI reaches the standards EU Stage IIIA and EPA Tier 4 interim in the power range 19 to 37 kilowatts. In order to comply with the exhaust emission standards EPA Tier 4 final (19 up to 56 kilowatts) and EU stage IIIB (37 to 56 kilowatts), the Hatz 3H50TIC is equipped with a combination of external exhaust gas recirculation (EGR) and diesel oxidation catalyst (DOC). Both engine variants will be available from 2018.

The consequent concept of H series pays off

All engines are characterised by an innovative concept, the compact dimensions and the exclusive use of premium components. Therefore, a long service life which is typical for Hatz products is ensured for these unique power packages. Even without diesel particulate filters, iHACS (intelligent Hatz Advanced Combustion Strategy) enables the engines to comply with the current exhaust emission standards and assures performance at reduced noise and vibration levels.

Ready for EU stage V

Motorenfabrik Hatz is the only manufacturer worldwide providing a complete Tier-4-final certified engine range up to 19 kilowatts. Therefore, the European legislation is adjusted to the Hatz standards in this power range. Motorenfabrik Hatz predicted the stricter regulations for the H-Family concerning a diesel particulate filter at higher power classes at the outset and designed the engines accordingly. At Bauma, the engine manufacturer presents the EU stage V solutions Hatz 3H50TICD and 4H50TICD which will be launched in the market well before the introduction of the new exhaust emission legislation in 2019.

Hatz Systems presents new generating sets and hydraulic power packs

Hatz System presents two new finished products, which all make use of the advantages of the new water-cooled engine series. Equipped with the engine Hatz 4H50TI at 1500 revolutions per minute, the newest generating set Hatz HEA 27TDCW5 produces 27 kilovolt-ampere at 50 hertz and 400 volt. With its robust frame and canopy, the set is especially suitable for the rental market. The second new product release is a worldwide unique hydraulic power pack. With the EU Stage IIIB engine Hatz 4H50TIC, the new Hatz HAA 55HDCW supplies 42 kilowatts of hydraulic power. Above all, the modular design and the extensive Hatz Systems modular construction set feature this power pack.